TurboGuard® GF Series

Large Geometry Pleated Filters for High Flow Graver GF Series filters feature microfiberglass media to handle higher flows with fewer filter elements

Read F.A.Q.

Large Geometry Pleated Filters for High Flow Graver GF Series filters feature microfiberglass media in a larger geometry to handle higher flows with fewer filter elements. The result is much faster, easier filter change outs. In addition, the inside to outside flow allows for excellent dirt holding capacity, extending the time between filter change outs. Filter housings are also available and because of the filters high flow and dirt holding capacity, smaller systems are possible, reducing upfront capital costs.

Materials of construction allow compatibility with some chemistries not served by all polypropylene elements
6" diameter, large geometry for high flows
Absolute retention ratings from 1 to 20 microns
Capable of flow rates up to 500 GPM in a single 60" element
Inside-out flow retains contaminant even during change out
Outer cage prevents media extrusion problem experienced with some competitive offerings
Retrofits competitive high flow filter housings
Thermally bonded construction

Typical Applications

Fuel Oil
Chemicals
Petrochemicals
Solvents
Oil and Gas

support literature

Looking for more information? Contact Us

Frequently asked questions

How to remove heavy metals from water and wastewater?

Many MetSorb® adsorbents will remove heavy metals from water and wastewater. Please view our product pages for more information.

Are heavy metals in water? Do they pose a threat to human health?

The USEPA issued and regularly reviews/updates the National Primary Drinking Water Regulations (NPDWR).

How can I remove lead from water?

Many MetSorb® adsorbents will remove lead and other heavy metals from water. Please view our product pages for more information.

How much uranium is safe in drinking water?

The USEPA has issued and regularly reviews/updates the National Primary Drinking Water Regulations (NPDWR).

Why do MetSorb® adsorbents sometimes have a bad smell and how do we get rid of this odor?

MetSorb adsorbents are made from metal oxides and rarely have any noticeable smell. They can sometimes concentrate bacteria (specifically sulfur reducing) that may be present in the drinking water well source. While this type of bacteria is naturally found in many well sources and are considered harmless, the resulting “rotten egg” smell can be unpleasant. In order to remove the bacteria from the MetSorb® media bed, we recommend performing a 25-50 ppm chlorine shock for 12-24 hours. The system should then be rinsed with fresh water until no residual chlorine odor is noted. If bacteria count in the well water is high, this chlorine shock of the MetSorb® media may be required 2 or 3 times per year.

How can uranium be removed from well water?

One way uranium can be removed is through adsorption. MetSorb® HMRG has a selective affinity for uranium.

Contact Us

If you have questions or comments regarding the information in this site, or if you wish to receive additional information on Graver Technologies, please contact us: