Depth Filters

Cylindrical products with tortuous path for capturing wide range of particle sizes and gelatinous contaminant

CMBF

Nominally rated melt-blown polypropylene depth filters with the unique Crystal Core to prevent collapse even at elevated temperatures. The robust media construction provides dependable, economic filtration.

MBC™

An economical, nominally rated disposable filter element constructed of 100% polypropylene media for chemical compatibility with a variety of process fluids. The molded core provides among the highest pressure ratings available in melt-blown polypropylene products.

Stratum™

Advanced four-zone melt blown filter cartridges available in high efficiency 99.9% rated Stratum A Series or the 90% nominal efficiency Stratum C Series from 0.5 to 75 microns. Stratum filters are made with 100% virgin polypropylene and are free of surfactants, binders, and adhesives.

COAX®

Unique two-zone structure with the first stage of nonwoven melt blown polypropylene intended to trap coarser particles and the second stage composed of a bicomponent polypropylene and polyethylene fiber to provide fine particle retention.

support literature

AB-001 – Seal Flush

Liquid Process FiltersDepth Filters

Application Case Study

AB-003 - Filtration Opportunities in Pulp and Paper

Liquid Process FiltersDepth Filters

Application Case Study

ACS-003 – Pre-RO for Ethanol Plant Apple Case Study

Liquid Process FiltersDepth Filters

Application Case Study

ACS-007 Sausage Casings Stratum

Liquid Process FiltersDepth Filters

Application Case Study

ACS-010 Water Quality for Animal Herds

Liquid Process FiltersDepth Filters

Application Case Study

Coax® Series

Liquid Process FiltersDepth FiltersCoax®

Data Sheet

Crystal MBF Series

Liquid Process FiltersDepth FiltersCrystal MBF

Data Sheet

MBC™ Series

Liquid Process FiltersDepth FiltersMBC™

Data Sheet

Stratum™ A Series

Liquid Process FiltersDepth FiltersStratum® A

Data Sheet

Stratum™ C Series

Liquid Process FiltersDepth FiltersStratum® C

Data Sheet

Case Study

Brochure

Frequently asked questions

How to remove heavy metals from water and wastewater?

Many MetSorb® adsorbents will remove heavy metals from water and wastewater. Please view our product pages for more information.

Are heavy metals in water? Do they pose a threat to human health?

The USEPA issued and regularly reviews/updates the National Primary Drinking Water Regulations (NPDWR).

How can I remove lead from water?

Many MetSorb® adsorbents will remove lead and other heavy metals from water. Please view our product pages for more information.

How much uranium is safe in drinking water?

The USEPA has issued and regularly reviews/updates the National Primary Drinking Water Regulations (NPDWR).

Why do MetSorb® adsorbents sometimes have a bad smell and how do we get rid of this odor?

MetSorb adsorbents are made from metal oxides and rarely have any noticeable smell. They can sometimes concentrate bacteria (specifically sulfur reducing) that may be present in the drinking water well source. While this type of bacteria is naturally found in many well sources and are considered harmless, the resulting “rotten egg” smell can be unpleasant. In order to remove the bacteria from the MetSorb® media bed, we recommend performing a 25-50 ppm chlorine shock for 12-24 hours. The system should then be rinsed with fresh water until no residual chlorine odor is noted. If bacteria count in the well water is high, this chlorine shock of the MetSorb® media may be required 2 or 3 times per year.

How can uranium be removed from well water?

One way uranium can be removed is through adsorption. MetSorb® HMRG has a selective affinity for uranium.

Contact Us

If you have questions or comments regarding the information in this site, or if you wish to receive additional information on Graver Technologies, please contact us: