Filtration & Separation

Industrial Air & Gas Filters & Systems

Graver Technologies offers solutions for a broad spectrum of process filtration applications. Our filters are integral in protecting various types of rotating equipment, such as vacuum pumps, turbines, and compressors. When standard filters do not fully meet customer expectations, our engineering team is prepared to design custom solutions that adhere to the strictest specifications. We are equipped to handle various special requirements, including:

  • Special Paint Processes: Tailoring products to meet specific coating and paint requirements.
  • Addition of Ancillary Devices: Integrating supplementary components as needed.
  • NDE Requirements: Conducting non-destructive examination as per project demands.
  • Custom Designs: Creating filters that meet precise customer specifications.

Download Documents

Search for product documents including Brochures, SDS, MSDS and Data Sheets.

Showing 0
Reset

Filters

related applications
Internal ID: 42
AGS™ Series Compressed Air & Gas Filters

AGS™ Series Compressed Air & Gas Filters

The AGS Series coalescing filters effectively separate oil, water, and other liquid aerosols from compressed air and gas lines.

Key features:
  • ASME Code design and constructed
  • High flow rate capability
  • Low pressure drop & long element life
  • High temperature capability
  • Economical replaceable cartridges
  • Modified and custom designs available
  • Design pressures from 180 psi to 1440 psi
  • Contact Factory for higher pressure applications
Request More Info
download support literature:
Data Sheet
Internal ID: 44
Air Drying Application

Air Drying Application

Explore Graver Technologies' filters for compressed air dryers.

Key features:
Request More Info
download support literature:
Case Study
Industries:
Internal ID: 45
Air Intake Filters - CA Series

Air Intake Filters - CA Series

The CA and CAS Series filters offer a replaceable, cleanable element that incorporates a pleated or "radial fin" cartridge design.

Key features:
  • Noise reduction – to help meet plant requirements
  • Low pressure drop – low energy loss
  • Maximum filter area and dirt holding capacity
  • Cleanable, replaceable 2stage filter element
  • Rugged allweather housing
  • Direct or remote mounting to machinery
  • Two styles to suit any application
Internal ID: 46
Air Intake Filters - PFS Series

Air Intake Filters - PFS Series

The PFS and PFD Series filter elements offer cleanable and replaceable panels that utilize a pleated media design.

Key features:
  • Compact pleated element panels provide maximum area and
  • dirt holding capacity
  • Low pressure drop, low energy costs
  • PFS Series: Positive sealing services
  • PFD Series: Two stage design with positive sealing services
  • Rugged allweather steel housing
  • Reduction of air and compressor noise
  • Safety screen design allows panel element replacement without interruption of equipment operation
  • Modified and custom designs available
  • Easy, low maintenance cost effective design
Request More Info
download support literature:
Data Sheet
Internal ID: 43
Air and Gas Overview

Air and Gas Overview

Use this document to explore Graver Technologies Air and Gas Filtration products.

Key features:
Internal ID: 51
Catalyst Recovery

Catalyst Recovery

Explore Graver Technologies' high-efficiency catalyst recovery with easy-to-use pleat packs, maximizing precious metal recovery and control.

Key features:
Request More Info
download support literature:
Brochure
Internal ID: 61
Compressed Air & Gas Filters

Compressed Air & Gas Filters

Use this document to explore Graver Technologies industrial filtration products.

Key features:
  • Suitable for air/gas and liquid applications.
  • Carbon-steel construction.
  • ASME Code designed and U stamped.
  • CE marked per pressure equipment directive (PED) 97/23/EC
Request More Info
download support literature:
Data Sheet
Internal ID: 63
Compressed Air & Gas Filters / Separators

Compressed Air & Gas Filters / Separators

Use this document to explore Graver Technologies Conselor Ags Series Air & Gas Filter Separators.

Key features:
  • ASME Code design and constructed
  • High flow rate capability
  • Low pressure drop & long element life
  • High temperature capability
  • Economical replaceable cartridges
  • Modified and custom designs available
  • Design pressures from 180 psi to 1440 psi
Request More Info
download support literature:
Data Sheet
Internal ID: 62
Compressed Air & Gas Filters CP Series

Compressed Air & Gas Filters CP Series

The CP Series are in-line filters that effectively remove dust, dirt, pipe scale, and other solid contaminants from compressed air and gas pipelines. Standard and custom designs available.

Key features:
  • ASME Code designed and constructed
  • Low pressure drop–low energy loss
  • High flow rate capability
  • Maximum filter area and dirt holding capacity
  • Cleanable, reusable filter element
  • In line connections
  • Modified and custom designs available
  • Design Pressures from 180 psi to 740 psi
  • Contact Factory for higher pressure applications
Request More Info
download support literature:
Data Sheet
Internal ID: 125
Filter Replacement Elements

Filter Replacement Elements

Explore Graver Technologies conselor replacement elements and element panels for industrial filtration products.

Key features:
Internal ID: 126
Filters for Natural Gas Transmission & Distribution

Filters for Natural Gas Transmission & Distribution

Natural gas traveling through pipelines can pick up some degrees of contaminants, which can cause compressor damage, regulator and meter damage, and/or increased pipeline maintenance. Download the attached documents to get information about Graver’s AGS series coalescers and/or CP series that eliminate solids and liquids that could lead to compressor failure.

Key features:
  • Removes solid and liquid contaminants:0.3μ and 1μ @ >99%
  • Pressures from 15 PSIG to 5,000 PSIG• Flows from 100 SCFM to 61,000 SCFM
  • Temperatures to 300° F
  • Connections from ½" to 24"
  • Design: ASME Section XIII, Div. 1 and PED97
  • Available in Carbon Steel, 304 and 316 MOC
  • Applications: Air, O2, H2, He, CH4, natural gas, N2, A
  • Media options: Polyester, Fiberglass
  • Closure options: flange, swing bolt, and quickopening (MODCO)• Custom designs available
  • Removes solid contaminants from 0.3μ @ >99.97%
  • Pressures from 15 PSIG to 5,000 PSIG
  • Flows from 100 SCFM to 250,000 SCFM
  • Temperatures to 300° F
  • Connections from ½" to 24"
  • Available in Carbon Steel, 304 and 316 MOC
  • Design: ASME Section XIII, Div. 1 and PED97
  • Applications: Air, O2, H2, He, CH4, natural gas, N2, A
  • Media options: Fiberglass, Polyester, Teflon,Nomex
  • Closure options: flange, swing bolt, and quickopening (MODCO)
  • Custom designs available
Internal ID: 217
GTX™ Series

GTX™ Series

The GTX™ Series are in-line filters that are designed to remove solids from compressed air and gas streams.

Key features:
  • Suitable for air/gas and liquid applications
  • Carbonsteel construction
  • ASME Code designed and U stamped
  • CE marked per pressure equipment directive (PED) 97/23/EC
Request More Info
download support literature:
Data Sheet
Internal ID: 127
Gas Turbine Air Intake Pre-Filters

Gas Turbine Air Intake Pre-Filters

Explore Graver Technologies Air Intake Elements and Prefilters.

Key features:
Request More Info
download support literature:
Data Sheet
Data Sheet
Internal ID: 220
HEPA

HEPA

The Graver Technologies HEPAfine® and ULPAfine® line of filtration products are designed to meet the stringent demands of critical environments in commercial, industrial, institutional and residential applications.

Key features:
Internal ID: 231
Inline Oil Mist Coalescers

Inline Oil Mist Coalescers

Use this document to explore the specifications about Inline Oil Mist Coalescers.

Key features:
  • An assortment of materials to meet your unique application. Available in carbon steel, 304, 316,304L, 316L, aluminum, and a variety of lined vessels.
  • Heavy-duty all-welded construction for maximum durability.
  • Wide range of connection sizes and types available to match your existing piping.
  • High quality element construction allows for multiple cleanings for increased filter life.
  • Low pressure drop designs allow for a longer running period between change-outs.
  • All filter elements are available in a wide range of material and temperature designs to meet your unique application.
Request More Info
download support literature:
Data Sheet
No results found. Please remove or reset selections.
Reset All
Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.

Contact Us

If you have questions or comments regarding the information in this site, or if you wish to receive additional information on Graver Technologies, please contact us:

Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.
Open Shortcut Menu