ZTEC™ E

• 7.0 ft2 (0.65 m2) of membrane surface area per 10" element — High throughput, longer online service reduces costly maintenance time
• Absolute rated membrane from 0.1 to 0.65 μm
• Manufactured in an ISO Class 7 cleanroom environment
• 100% flushed with 18 MΩ cm DI water and gross integrity tested
• Fixed pore construction eliminates dirt unloading as differential pressure increases
• Low extractables

• Manufactured, flushed, tested and packaged, in an ISO Class 7 Cleanroom Environment
• Filters are 100% flushed with 18 MΩcm DI water and integrity tested
• Resistivity rinse up to 18 MΩcm and single digit ppb TOC levels with minimal throughput
• Available in a variety of end cap/adapter configurations to fit all industry standard housings
• Pore size, lot and serial number are stamped on each filter element for identification and traceability
• Complete qualification guide available

• Manufactured in an ISO Class 7 Cleanroom Environment
• 100% flushed with ultrapure DI water and integrity tested
• Repeatably steamable/sanitizable
• High retentions up to 107/cm2 challenged for bacteria and yeast
• Pore size, lot and serial number are stamped on each filter element for identification and traceability
• Complete qualification guide available

• Low pressure drop reduces energy costs
• High dirt holding capacity minimizes changeouts and down time
• All thermal bonded construction with no adhesives
• Available in all common configurations to allow use of existing filter housings
• Cost effective absolute filtration

• Singlelayer construction provides superior flow rates and minimizes filtration system size
• 100% Flushed with 18 megohm DI water and integrity tested
• Filters are manufactured, flushed, tested and packaged in an ISO Class 7 Cleanroom Environment
• Each filter element stamped with pore size, lot and serial number for identification and traceability
• Demonstrated bacterial removal in air with an aerosol challenge level of 107
• Brevundimonas diminuta/10" cartridge
• Complete qualification guide available

‍

• High surface area, singlelayer construction provides superior flow rates and minimizes filtration system size
• 100% Flushed with 18 MΩcm DI water and integrity tested
• Filters are manufactured, flushed, tested and packaged in an ISO Class 7 Cleanroom Environment
• Each filter element stamped with pore size, lot and serial number for identification and traceability
• Complete qualification guide available
• Available prewet for use with aqueous based chemicals

• Singlelayer construction provides superior flow rates and minimizes filtration system size
• 100% Flushed with 18 megohm DI water and integrity tested
• Filters are manufactured, flushed, tested and packaged in an ISO Class 7 Cleanroom Environment
• Each filter element stamped with pore size, lot and serial number for identification and traceability
• Complete bacterial removal in liquid at a challenge level of 107 /cm2 Brevundimonas diminuta
• Retentive for aerosolized virus
• Validation guide available

• Manufactured, flushed, tested and packagedin an ISO Class 7 Cleanroom Environment
• Filters are flushed with 18 MΩ-cm DI water toensure low extractables and low particle shedding
• 100% integrity tested to provide reliable performance
• Resistivity rinse-up to 18 MΩ-cm and single digitppb TOC levels with minimal throughput
• Pore size ratings from 0.05 to 10 micronto meet a broad range of applications
• Wet-Pack option available to eliminate the requirementfor solvent pre-wetting in aqueous applications